SensitivityMatch
EN
Convert now

ARC Raiders sensitivity finder

Seven rounds of lower or higher, set up for ARC Raiders. Each answer halves the range, and you finish on a sensitivity you picked yourself.

By · Updated October 21, 2026

Game

How to find your sensitivity in ARC Raiders

  1. Set your DPIKeep the DPI you play with. The finder works in turn distance, so the result is right for that DPI.
  2. Type the sensitivity it showsIn Settings, then Mouse and Keyboard, set Sensitivity X-Axis to the number from round 1.
  3. Test it for a minuteUse the practice range or an aim trainer. Track a moving target, then flick to a still one.
  4. Answer lower or higherLower if you want the view to turn slower, higher if you want it faster.
  5. Repeat for seven roundsThe last number is your ARC Raiders sensitivity. Keep it for a week before you change it.

Where the search starts in ARC Raiders

The default range is 15 to 90 cm per 360°, the general range that suits most players.

In ARC Raiders one count turns the view 0.0014 degrees at sensitivity 1. The table shows the number you would type for the three ends of the search at common DPIs.

Your DPISlowest (90 cm)Round 1 (37 cm)Fastest (15 cm)
400 DPI18.6645.71111.98
800 DPI9.33122.8655.99
1600 DPI4.66611.4327.99

Questions

What is the best ARC Raiders sensitivity finder?

This one follows the PSA method: you test a sensitivity, answer lower or higher, and the range halves each time. After seven rounds you are within about 1.4% of a value that suits your aim in ARC Raiders. It runs in your browser and stores nothing.

Where do I change the sensitivity in ARC Raiders?

In Settings, then Mouse and Keyboard, look for Sensitivity X-Axis. Type the number the finder shows, play for a minute in the practice range, and come back to answer.

What range should I search in ARC Raiders?

The finder starts at 15 to 90 cm per 360°, the general range that suits most players. At 800 DPI that is a Sensitivity X-Axis of 9.331 (slowest) to 55.99 (fastest). Change the two boxes if you already know you want it faster or slower.

What is the first sensitivity I will be asked to try?

The middle of the range, 37 cm per 360°. At 800 DPI that is 22.86 in ARC Raiders, at 400 DPI 45.71, and at 1600 DPI 11.43.

Does it find my ADS or scope sensitivity too?

No. The finder works on your normal (hipfire) sensitivity. When you have it, use the ADS sensitivity converter to match your scopes to it.

Is there anything special about ARC Raiders sensitivity?

The value is community-measured. In ARC Raiders the turn speed grows in proportion to the vertical field of view (checked at FOV 60, 70 and 80), so the converter has a FOV field for it and starts at the default of 70. Turn Mouse Smoothing off, because the game smooths the mouse otherwise.

Related

Sensitivity finder for other games