SensitivityMatch
EN
Convert now

THE FINALS sensitivity finder

Seven rounds of lower or higher, set up for THE FINALS. Each answer halves the range, and you finish on a sensitivity you picked yourself.

By · Updated October 21, 2026

Game

How to find your sensitivity in THE FINALS

  1. Set your DPIKeep the DPI you play with. The finder works in turn distance, so the result is right for that DPI.
  2. Type the sensitivity it showsIn the controls settings, under mouse, set Sensitivity to the number from round 1.
  3. Test it for a minuteUse the practice range or an aim trainer. Track a moving target, then flick to a still one.
  4. Answer lower or higherLower if you want the view to turn slower, higher if you want it faster.
  5. Repeat for seven roundsThe last number is your THE FINALS sensitivity. Keep it for a week before you change it.

Where the search starts in THE FINALS

The default range is 15 to 90 cm per 360°, the general range that suits most players.

In THE FINALS one count turns the view 0.001 degrees at sensitivity 1. The table shows the number you would type for the three ends of the search at common DPIs.

Your DPISlowest (90 cm)Round 1 (37 cm)Fastest (15 cm)
400 DPI25.462.22152.4
800 DPI12.731.1176.2
1600 DPI6.3515.5538.1

Questions

What is the best THE FINALS sensitivity finder?

This one follows the PSA method: you test a sensitivity, answer lower or higher, and the range halves each time. After seven rounds you are within about 1.4% of a value that suits your aim in THE FINALS. It runs in your browser and stores nothing.

Where do I change the sensitivity in THE FINALS?

In the controls settings, under mouse, look for Sensitivity. Type the number the finder shows, play for a minute in the practice range, and come back to answer.

What range should I search in THE FINALS?

The finder starts at 15 to 90 cm per 360°, the general range that suits most players. At 800 DPI that is a Sensitivity of 12.7 (slowest) to 76.2 (fastest). Change the two boxes if you already know you want it faster or slower.

What is the first sensitivity I will be asked to try?

The middle of the range, 37 cm per 360°. At 800 DPI that is 31.11 in THE FINALS, at 400 DPI 62.22, and at 1600 DPI 15.55.

Does it find my ADS or scope sensitivity too?

No. The finder works on your normal (hipfire) sensitivity. When you have it, use the ADS sensitivity converter to match your scopes to it.

Is there anything special about THE FINALS sensitivity?

The 0.001 yaw is community-measured: several converters use it and pro settings with a published cm/360 match it within about 3 percent. Check the result with one full turn in the game.

Related

Sensitivity finder for other games